|
| 形状 | SMD |
|---|---|
| 尺寸代码(单位为mm) | 0806 |
| 长度 | 0.85mm |
| 长度公差 | ±0.05mm |
| 宽度 | 0.65mm |
| 宽度公差 | ±0.05mm |
| 厚度 | 0.45mm |
| 厚度公差 | ±0.05mm |
| 共模阻抗(at 100MHz) | 90Ω |
| 共膜抗阻(at 100MHz)公差 | ±20% |
| 额定电流 | 100mA |
| 额定电压 | 5Vdc |
| 耐电压 | 12.5Vdc |
| 直流电阻(max) | 3.75Ω |
| 直流电阻 | 3.0Ω±25% |
| 绝缘电阻(min.) | 100MΩ |
| 工作温度范围 | -40℃ to 85℃ |
| 质量(标准值) | 0.001g |
| 电路数目 | 1 |
| 工作温度范围(含自身温度上升) | No |
特点
1. Small size and tight dimensional tolerance
Size:0.85x0.65x0.45mm
Tolerance:+-0.05mm
2. High common mode impedance up to 120ohm (at 100MHz)
is available.
3. DLP0NS series enables noise suppression for
differential signal line without distortion in high-
speed signal transmission due to its line impedance
matching.
4. High Cut-off Frequency.（DLP0NSA150HL2：8GHz typ.）
■Application
Common mode noise suppression of high
speed differential signal lines for USB 2.0, IEEE1394,
LVDS etc.
1. Note PCs
2. Cellular phones
3. Digital Still Cameras, Digital Video Cameras
4. Designed to match signal line characteristic impedance
※DLP0NSC280HL2/DLP0NSC900HL2 is designed to meet mipi D-phy.
※DLP0NSA150HL2 is designed to meet Display Port.
※DLP0NSA070HL2 is designed to meet SI requirement of SATA.
用途
| 其他用途 |
For general |
|---|
包装信息
| 包装 | 规格 | 超小订购单位 |
|---|---|---|
L | 180mm压纹带 | 10000 |
B | 散装袋 | 500 |
